Libris Britannia 4/science library(b).zip/science library(b)/DJGPP/GCC257S5.ZIP/src/gcc-257/makefile.in

Makefile | 1993-11-25 | 86KB | 2,201 lines

# Makefile for GNU C compiler.
#   Copyright (C) 1987, 88, 90, 91, 92, 1993 Free Software Foundation, Inc.

#This file is part of GNU CC.

#GNU CC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.

#GNU CC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#GNU General Public License for more details.

#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING.  If not, write to
#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.

# The targets for external use include:
# all, doc, proto, install, install-cross, install-cross-rest,
# uninstall, TAGS, mostlyclean, clean, distclean, realclean,
# stage1, stage2, stage3, stage4.

# Suppress smart makes who think they know how to automake Yacc files
.y.c:

# Variables that exist for you to override.
# See below for how to change them for certain systems.

# Selection of languages to be made.
LANGUAGES = c c++ objective-c proto

ALLOCA =
ALLOCA_FLAGS =
ALLOCA_FINISH = true

# Various ways of specifying flags for compilations:
# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
# BOOT_CFLAGS is the value of CFLAGS to pass
# to the stage2 and stage3 compilations
# XCFLAGS is used for most compilations but not when using the GCC just built.
XCFLAGS =
CFLAGS = -g
BOOT_CFLAGS = -O $(CFLAGS)
# These exists to be overridden by the x-* and t-* files, respectively.
X_CFLAGS =
T_CFLAGS =

X_CPPFLAGS =
T_CPPFLAGS =

CC = cc
BISON = bison
BISONFLAGS =
AR = ar
OLDAR_FLAGS = qc
AR_FLAGS = rc
SHELL = /bin/sh
# on sysV, define this as cp.
INSTALL = install -c
# These permit overriding just for certain files.
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
SYMLINK = ln -s
MAKEINFO = makeinfo
TEXI2DVI = texi2dvi

# Define this as & to perform parallel make on a Sequent.
# Note that this has some bugs, and it seems currently necessary
# to compile all the gen* files first by hand to avoid erroneous results.
P =

# How to invoke ranlib.
RANLIB = ranlib
# Test to use to see whether ranlib exists on the system.
RANLIB_TEST = [ -f /usr/bin/ranlib -o -f /bin/ranlib ]

# Compiler to use for compiling libgcc1.a.
# OLDCC should not be the GNU C compiler,
# since that would compile typical libgcc1.a functions such as mulsi3
# into infinite recursions.
OLDCC = cc

# CFLAGS for use with OLDCC, for compiling libgcc1.a.
# NOTE: -O does not work on some Unix systems!
CCLIBFLAGS = -O

# Version of ar to use when compiling libgcc1.a.
OLDAR = ar

# Target to use when installing include directory.  Either
# install-headers-tar or install-headers-cpio.
INSTALL_HEADERS_DIR = install-headers-tar

# The GCC to use for compiling libgcc2.a, enquire, and cross-test.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
GCC_FOR_TARGET = ./xgcc -B./

# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# It also specifies -B$(tooldir)/ to find as and ld for a cross compiler.
GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS)

# Special flags for compiling enquire.
# We disable optimization to make floating point more reliable.
ENQUIRE_CFLAGS = -DNO_MEM -DNO_STDDEF -DNO_LONG_DOUBLE_IO -O0
ENQUIRE_LDFLAGS = $(LDFLAGS)

# Tools to use when building a cross-compiler.
# These are used because `configure' appends `cross-make'
# to the makefile when making a cross-compiler.

TARGET_TOOLPREFIX = $(tooldir)/bin/
AR_FOR_TARGET = $(TARGET_TOOLPREFIX)ar
AR_FOR_TARGET_FLAGS = rc
RANLIB_FOR_TARGET = $(TARGET_TOOLPREFIX)ranlib
RANLIB_TEST_FOR_TARGET = [ -f $(TARGET_TOOLPREFIX)ranlib ]

# Dir to search for system headers.  Overridden by cross-make.
SYSTEM_HEADER_DIR = /usr/include

# Control whether to run fixproto.
STMP_FIXPROTO = stmp-fixproto

# There may be a premade insn-attrtab.c for this machine.
# (You could rebuild it with genattrtab as usual, but it takes a long time.)
# PREMADE_ATTRTAB is the file name of the file to use.
# PREMADE_ATTRTAB_MD is the md file it corresponds to.
PREMADE_ATTRTAB_MD = Makefile  # Guaranteed not to cmp equal to md.
PREMADE_ATTRTAB =

target= ... `configure' substitutes actual target name here.
xmake_file= ... `configure' substitutes actual x- file name here.
tmake_file= ... `configure' substitutes actual t- file name here.
version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c`
mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`

# Directory where sources are, from where we are.
srcdir = .
# Common prefix for installation directories.
# NOTE: This directory must exist when you start installation.
prefix = /usr/local
# Directory in which to put localized header files. On the systems with
# gcc as the native cc, `local_prefix' may not be `prefix' which is
# `/usr'.
# NOTE: local_prefix *should not* default from prefix.
local_prefix = /usr/local
# Directory in which to put host dependent programs and libraries
exec_prefix = $(prefix)
# Directory in which to put the executable for the command `gcc'
bindir = $(exec_prefix)/bin
# Directory in which to put the directories used by the compiler.
libdir = $(exec_prefix)/lib
# Directory in which the compiler finds executables, libraries, etc.
libsubdir = $(libdir)/gcc-lib/$(target)/$(version)
# Directory to search for site-specific includes.
includedir = $(local_prefix)/include
# assertdir is overridden in cross-make.
# (But this currently agrees with what is in cross-make.)
assertdir = $(tooldir)/include
# where the info files go
infodir = $(prefix)/info
# Extension (if any) to put in installed man-page filename.
manext = .1
# Directory in which to put man pages.
mandir = $(prefix)/man/man1
# Directory in which to find other cross-compilation tools and headers.
# Used in install-cross.
tooldir = $(exec_prefix)/$(target)
# Dir for temp files.
tmpdir = /tmp

# Additional system libraries to link with.
CLIB=

# Change this to a null string if obstacks are installed in the
# system library.
OBSTACK=obstack.o

# Specify the rule for actually making libgcc.a,
LIBGCC = libgcc.a
# and the rule for installing it.
INSTALL_LIBGCC = install-libgcc

# Specify the rule for actually making libgcc1.a.
# The value may be empty; that means to do absolutely nothing
# with or for libgcc1.a.
LIBGCC1 = libgcc1.a

# Specify the rule for making libgcc1.a for a cross-compiler.
# The default rule assumes that libgcc1.a is supplied by the user.
CROSS_LIBGCC1 = libgcc1.cross

# Specify the rule for actually making libgcc2.a.
LIBGCC2 = libgcc2.a

# Options to use when compiling libgcc2.a.
# -g1 causes output of debug info only for file-scope entities.
# we use this here because that should be enough, and also
# so that -g1 will be tested.
LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) -g1

# Additional options to use when compiling libgcc2.a.
# Some targets override this to -Iinclude
LIBGCC2_INCLUDES =

# Things which must be built before building libgcc2.a.
# Some targets override this to stmp-int-hdrs
LIBGCC2_DEPS =

# Enquire target (This is a variable so that a target can choose not to
# build it.)
ENQUIRE = enquire

# Cross-test target (must also be overridable for a target)
CROSS_TEST = cross-test

# List of extra executables that should be compiled for this target machine
# that are used for compiling from source code to object code.
# The rules for compiling them should be in the t-* file for the machine.
EXTRA_PASSES =

# Like EXTRA_PASSES, but these are used when linking.
EXTRA_PROGRAMS =

# List of extra object files that should be compiled for this target machine.
# The rules for compiling them should be in the t-* file for the machine.
EXTRA_PARTS =

# List of extra object files that should be compiled and linked with
# compiler proper (cc1, cc1obj, cc1plus).
EXTRA_OBJS =

# List of additional header files to install.
# Often this is edited directly by `configure'.
EXTRA_HEADERS =

# Set this to `ld' to enable use of collect2.
# USE_COLLECT2 =
# It is convenient for configure to add the assignment at the beginning,
# so don't override it here.

# List of extra C and assembler files to add to libgcc1.a.
# Assembler files should have names ending in `.asm'.
LIB1FUNCS_EXTRA =

# List of extra C and assembler files to add to libgcc2.a.
# Assembler files should have names ending in `.asm'.
LIB2FUNCS_EXTRA =

# Default float.h source to use for cross-compiler.
CROSS_FLOAT_H=float.h-cross

# Program to convert libraries.
LIBCONVERT =

# Control whether header files are installed.
INSTALL_HEADERS=install-headers

# Options for tar when copying trees.  So HPUX can override it.
TAROUTOPTS = xpBf

# Select which version of fixincludes to use (I.E. regular versus SVR4)
# This value is overridden directly by configure.
FIXINCLUDES=fixincludes

# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
# just as /usr/include is.
# *Do not* use this for directories that happen to contain
# header files, but are not searched automatically by default.
# On most systems, this is empty.
OTHER_FIXINCLUDES_DIRS=

# List of things which should already be built whenever we try to use xgcc
# to compile anything (without linking).
GCC_PASSES=xgcc cc1 cpp $(EXTRA_PASSES)

# List of things which should already be built whenever we try to use xgcc
# to link anything.
GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS)

# Directory to link to, when using the target `maketest'.
DIR = ../gcc

# Guaranteed to not exist when not passing md through cpp.
MD_FILE = md-cpp-not-used

# Flags to use when cross-building GCC.
# Prefix to apply to names of object files when using them
# to run on the machine we are compiling on.
HOST_PREFIX=
# Prefix to apply to names of object files when compiling them
# to run on the machine we are compiling on.
# The default for this variable is chosen to keep these rules
# out of the way of the other rules for compiling the same source files.
HOST_PREFIX_1=loser-
HOST_CC=$(CC)
HOST_CFLAGS=$(ALL_CFLAGS)
HOST_CLIB=$(CLIB)
HOST_LDFLAGS=$(LDFLAGS)
HOST_CPPFLAGS=$(ALL_CPPFLAGS)
HOST_ALLOCA=$(ALLOCA)
HOST_MALLOC=$(MALLOC)
HOST_OBSTACK=$(OBSTACK)

# Choose the real default target.
ALL=all.internal

# Choose the real install target.
INSTALL_TARGET=install-normal

# Source for float.h.  Overridden by cross-make.
FLOAT_H=float.h-nat

# End of variables for you to override.

# Definition of `all' is here so that new rules inserted by sed
# do not specify the default target.
# The real definition is under `all.internal' (for native compilers)
# or `all.cross' (for cross compilers).
all: all.indirect

# This tells GNU Make version 3 not to put all variables in the environment.
.NOEXPORT:

# sed inserts variable overrides after the following line.
####target overrides
####host overrides
####cross overrides
####build overrides

# Now figure out from those variables how to compile and link.

all.indirect: $(ALL)

# IN_GCC tells obstack.h to use gstddef.h.
INTERNAL_CFLAGS = $(CROSS) -DIN_GCC

# This is the variable actually used when we compile.
ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS)

# Likewise.
ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)

# Even if ALLOCA is set, don't use it if compiling with GCC.
USE_ALLOCA= ` case "${CC}" in "${OLDCC}") echo ${ALLOCA} ;; esac `
USE_HOST_ALLOCA= ` case "${HOST_CC}"@"${HOST_ALLOCA}" in "${OLDCC}"@?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `

# Dependency on obstack, alloca, malloc or whatever library facilities
# are not installed in the system libraries.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC)

# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC)

# How to link with both our special library facilities
# and the system's installed libraries.
LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(CLIB)

# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC)  \
        $(HOST_CLIB)

HOST_RTL = $(HOST_PREFIX)rtl.o
HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o
HOST_PRINT = $(HOST_PREFIX)print-rtl.o

# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
# so that tm.h and config.h will be found in the compilation
# subdirectory rather than in the source directory.
INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config
SUBDIR_INCLUDES = -I.. -I../$(srcdir) -I../$(srcdir)/config

# Always use -I$(srcdir)/config when compiling.
.c.o:
    $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<

# This tells GNU make version 3 not to export all the variables
# defined in this file into the environment.
.NOEXPORT:

# Lists of files for various purposes.

# A list of all the language-specific executables.
COMPILERS = cc1 cc1plus cc1obj

# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o c-lex.o c-pragma.o \
   c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o

# Language-specific object files for Objective C.
OBJC_OBJS = objc-parse.o objc-act.o c-lex.o c-pragma.o \
   c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o

# Language-specific object files for C++.
CPLUS_OBJS = cp-parse.o cp-decl.o cp-decl2.o \
   cp-typeck.o cp-type2.o cp-tree.o cp-ptree.o \
   cp-cvt.o cp-search.o cp-lex.o cp-gc.o cp-call.o \
   cp-class.o cp-init.o cp-method.o cp-except.o \
   cp-expr.o cp-pt.o cp-edsel.o cp-xref.o \
   $(CPLUS_INPUT) cp-spew.o c-common.o cp-error.o cp-errfn.o

# Files specific to the C interpreter bytecode compiler(s).
BC_OBJS = bc-emit.o bc-optab.o

# Language-independent object files.
OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
 function.o stmt.o expr.o calls.o expmed.o explow.o optabs.o varasm.o \
 rtl.o print-rtl.o rtlanal.o emit-rtl.o real.o \
 dbxout.o sdbout.o dwarfout.o xcoffout.o \
 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o \
 regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o \
 insn-peep.o reorg.o sched.o final.o recog.o reg-stack.o \
 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
 insn-attrtab.o aux-output.o getpwd.o convert.o $(EXTRA_OBJS)

# GEN files are listed separately, so they can be built before doing parallel
#  makes for cc1 or cc1plus.  Otherwise sequent parallel make attempts to load
#  them before rtl.o is compiled.
GEN= genemit genoutput genrecog genextract genflags gencodes genconfig genpeep

# Files to be copied away after each stage in building.
STAGESTUFF = *.o insn-flags.h insn-config.h insn-codes.h \
 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
 insn-attr.h insn-attrtab.c insn-opinit.c \
 stamp-flags stamp-config stamp-codes \
 stamp-output stamp-recog stamp-emit stamp-extract stamp-peep \
 stamp-attr stamp-attrtab stamp-opinit stamp-proto \
 genemit genoutput genrecog genextract genflags gencodes genconfig genpeep \
 genattrtab genattr genopinit \
 bc-arity.h bc-opcode.h bc-opname.h \
 stamp-bcarity stamp-bcopcode stamp-bcopname \
 bi-arity bi-opcode bi-opname \
 $(GCC_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross cccp g++ g++-cross \
 cc1plus cc1obj enquire protoize unprotoize specs collect2 $(USE_COLLECT2)

# Members of libgcc1.a.
LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
   _lshrsi3 _lshlsi3 _ashrsi3 _ashlsi3 \
   _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
   _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
   _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
   _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
   _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2

# Library members defined in libgcc2.c.
LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
     _lshrdi3 _lshldi3 _ashldi3 _ashrdi3 _ffsdi2 \
    _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
    _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
    _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
    _fixtfdi _fixunstfdi _floatditf \
    __gcc_bcmp _varargs _eprintf _op_new _new_handler _op_delete \
    _bb _shtab _clear_cache _trampoline __main _exit _ctors

# Header files that are made available under the same name
# to programs compiled with GCC.
USER_H = va-alpha.h va-h8300.h va-i860.h va-i960.h va-mips.h va-m88k.h \
    va-pa.h va-pyr.h va-sparc.h va-clipper.h va-spur.h proto.h $(EXTRA_HEADERS)

# The files that "belong" in CONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
# All they would do is cause complete recompilation every time
# one of the machine description files is edited.
# That may or may not be what one wants to do.
# If it is, rm *.o is an easy way to do it.
# CONFIG_H = config.h tm.h
CONFIG_H =
RTL_H = rtl.h rtl.def machmode.h machmode.def
TREE_H = tree.h real.h tree.def machmode.h machmode.def
CPLUS_TREE_H = $(TREE_H) cp-tree.h cp-tree.def
BYTECODE_H = bytecode.h bc-emit.h bc-optab.h

# Avoid a lot of time thinking about remaking Makefile.in and *.def.
.SUFFIXES: .in .def

Makefile: $(srcdir)/Makefile.in $(srcdir)/configure $(srcdir)/version.c \
   $(srcdir)/config/$(xmake_file) $(srcdir)/config/$(tmake_file)
    sh config.status

all.internal: start.encap rest.encap
# This is what to compile if making a cross-compiler.
# Note that we can compile enquire using the cross-compiler just build,
# although we can't run it on this machine.
all.cross: native gcc-cross g++-cross specs $(LIBGCC) stmp-headers $(STMP_FIXPROTO) $(CROSS_TEST) $(ENQUIRE) $(EXTRA_PARTS)
# This is what to compile if making gcc with a cross-compiler.
all.build: native xgcc g++ $(EXTRA_PARTS)
# This is what must be made before installing GCC and converting libraries.
start.encap: native xgcc g++ specs $(LIBGCC1) xlimits.h
# Use this to make a GCC that will be used only to recompile GCC.
for-bootstrap: start.encap $(LIBGCC)
# These can't be made, with COFF encapsulation, until after GCC can run.
rest.encap: $(LIBGCC) stmp-headers $(STMP_FIXPROTO) $(EXTRA_PARTS)
# This is what is made with the host's compiler
# whether making a cross compiler or not.
native: config.status cpp $(LANGUAGES) $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)

# Define the names for selecting languages in LANGUAGES.
# Note that it would be nice to move the dependency on g++
# into the C++ rule, but that needs a little bit of work
# to do the right thing within all.cross.
C c: cc1
C++ c++: cc1plus
# The next two ought to depend on objc-runtime, but that doesn't work yet.
OBJC objc: cc1obj
OBJECTIVE-C objective-c: cc1obj
PROTO: proto

# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date.  So we must verify that
# config.status does not exist before failing.
config.status:
    @if [ ! -f config.status ] ; then \
      echo You must configure gcc.  Look at the INSTALL file for details.; \
      false; \
    else \
      true; \
    fi

# On the target machine, finish building a cross compiler.
# This does the things that can't be done on the host machine.
rest.cross: $(LIBGCC) gfloat.h specs

# Verify that it works to compile and link cross-test.
# If it does, then there are sufficient replacements for libgcc1.a.
cross-test: cross-test.o native gcc-cross $(LIBGCC) $(GCC_PARTS)
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) cross-test.o -o $@
cross-test.o: cross-test.c native gcc-cross
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/cross-test.c

# Recompile all the language-independent object files.
# This is used only if the user explicitly asks for it.
compilations: ${OBJS}

# We call this executable `xgcc' rather than `gcc'
# to avoid confusion if the current directory is in the path
# and CC is `gcc'.  It is renamed to `gcc' when it is installed.
xgcc: gcc.o version.o $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o xgcc gcc.o version.o $(LIBS)

# Dump a specs file to make -B./ read these specs over installed ones.
specs: xgcc
    $(GCC_FOR_TARGET) -dumpspecs > specs

# Create the compiler driver for g++.
g++: g++.o $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o g++ g++.o $(LIBS)

# We do want to create an executable named `xgcc', so we can use it to
# compile libgcc2.a.
# Also create gcc-cross, so that install-common will install properly.
gcc-cross: xgcc
    cp xgcc gcc-cross

# Create a version of the g++ driver which calls the cross-compiler.
g++-cross: $(srcdir)/g++.c
    $(CC) $(ALL_CFLAGS) $(INCLUDES) $(LDFLAGS) -o g++-cross \
       -DGCC_NAME=\"$(target)-gcc\" $(srcdir)/g++.c version.o $(LIBS)

cc1: $(P) $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1 $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)

cc1plus: $(P) $(CPLUS_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1plus $(CPLUS_OBJS) $(BC_OBJS) $(OBJS) $(LIBS)

cc1obj: $(P) $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1obj $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)

# Copy float.h from its source.
gfloat.h: $(FLOAT_H)
    cp $(FLOAT_H) gfloat.h

# Create float.h source for the native machine.
float.h-nat: enquire
    -./enquire -f > tmp-float.h
    mv tmp-float.h float.h-nat

# Create a dummy float.h source for a cross-compiler.
float.h-cross:
    echo "#error float.h values not known for cross-compiler" > float.h-cross

# Used to compile enquire with standard cc, but have forgotten why.
# Let's try with GCC.
enquire: enquire.o $(GCC_PARTS)
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
enquire.o: $(srcdir)/enquire.c $(GCC_PASSES)
#    -if [ "$(srcdir)" != "." ]; then rm -f ./enquire.c; else true; fi
#    -cp $(srcdir)/enquire.c . > /dev/null 2>&1
# Breaking this line caused a problem with one version of GNU make.
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) -I. -c $(srcdir)/enquire.c

# Build the version of limits.h that we will install.
xlimits.h: glimits.h limitx.h limity.h
    if [ -f $(SYSTEM_HEADER_DIR)/limits.h ] ; then \
      cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > xlimits.h; \
    else \
      cat $(srcdir)/glimits.h > xlimits.h; \
    fi

# Build libgcc.a.
# This is done in two parts because some functions, in libgcc1.c,
# must be compiled with something other than GCC,
# while the rest, in libgcc2.c, must be compiled with xgcc.
# That means we can't do libgcc2.c until after xgcc, cc1, etc.

# Use this as value of LIBGCC1 to cause conversion to GNU library format.
# LIBCONVERT should put its output in libgcc1.conv.
libgcc1.conv: libgcc1.a
    $(LIBCONVERT) libgcc1.a libgcc1.conv

# Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
# Make an empty file instead.
libgcc1.null: $(GCC_PASSES)
    echo "__foo () {}" > dummy.c
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
    $(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy.o
    rm -f dummy.o dummy.c

# This is $(LIBGCC1) for a cross-compiler.
# We have no automatic way of building libgcc1.a,
# so it's up to the installer to find a way to do that.
# This rule deliberately does not depend on libgcc1.a
# so that it will fail if the installer hasn't provided it.
libgcc1.cross:
    mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false)

# Compile the library of arithmetic subroutines with the native compiler.
# Don't compile it with GCC!
# (That would cause most arithmetic functions to call themselves.)
libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status
    -rm -f tmplibgcc1.a
# Actually build it in tmplibgcc1.a, then rename at end,
# so that libgcc1.a itself remains nonexistent if compilation is aborted.
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
#    set -e;
    for name in $(LIB1FUNCS); \
    do \
      echo $${name}; \
      rm -f $${name}.o; \
      $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
      if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
      mv libgcc1.o $${name}.o; \
      $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}.o; \
      rm -f $${name}.o; \
    done
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# Then ignore it.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
    -for file in .. $(LIB1FUNCS_EXTRA); \
    do \
      if [ x$${file} != x.. ]; then \
        name=`echo $${file} | sed -e 's/[.]c$$//' -e 's/[.]asm$$//'`; \
        echo $${name}; \
        if [ $${name}.asm = $${file} ]; then \
          cp $${file} $${name}.s || exit 1; file=$${name}.s; \
        else true; fi; \
        $(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
        if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
        $(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}.o; \
        if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
        rm -f $${name}.[so]; \
      else true; \
      fi; \
    done
    mv tmplibgcc1.a libgcc1.a

# Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
# But recompiling cc1 should not force recompilation of libgcc2.a.
# If you want to force recompilation, delete libgcc2.a.
libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS)
    -if [ -f libgcc2.ready ] ; then \
        true; \
    else \
        touch libgcc2.ready; \
    fi

libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(LIB2FUNCS_EXTRA) \
   machmode.h longlong.h gbl-ctors.h config.status
# Actually build it in tmplibgcc2.a, then rename at end,
# so that libgcc2.a itself remains nonexistent if compilation is aborted.
    -rm -f tmplibgcc2.a
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
#    set -e;
    for name in $(LIB2FUNCS); \
    do \
      echo $${name}; \
      $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
          $(srcdir)/libgcc2.c -o $${name}.o; \
      if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
      $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}.o; \
      rm -f $${name}.o; \
    done
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# Then ignore it.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
    -for file in .. $(LIB2FUNCS_EXTRA); \
    do \
      if [ x$${file} != x.. ]; then \
        name=`echo $${file} | sed -e 's/[.]c$$//' -e 's/[.]asm$$//'`; \
        echo $${name}; \
        if [ $${name}.asm = $${file} ]; then \
          cp $${file} $${name}.s || exit 1; file=$${name}.s; \
        else true; fi; \
        $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
        if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
        $(AR) $(AR_FLAGS) tmplibgcc2.a $${name}.o; \
        rm -f $${name}.[so]; \
      else true; \
      fi; \
    done
    mv tmplibgcc2.a libgcc2.a
# These lines were deleted from above the mv command
# because ranlibing libgcc.a itself should suffice.
#    -if [ x${HPUX_GAS} = x ] ; then \
#      if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc2.a; else true; fi \
#    else true; fi

# Combine the various libraries into a single library, libgcc.a.
libgcc.a: $(LIBGCC1) $(LIBGCC2)
    -rm -rf tmplibgcc.a libgcc.a tmpcopy
    mkdir tmpcopy
    -if [ x$(LIBGCC1) != x ];            \
    then (cd tmpcopy; $(AR) x ../$(LIBGCC1));    \
    else true;                    \
    fi
# Some versions of ar (specifically the one in RISC/os 5.x), create an
# unwritable table of contents file, and then print an error message when
# the second ar command tries to overwrite this file.  To avoid the error
# message from ar, we make sure all files are writable.
    (cd tmpcopy; chmod +w * > /dev/null 2>&1)
    (cd tmpcopy; $(AR) x ../$(LIBGCC2))
    (cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *.o)
    rm -rf tmpcopy
    -if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
# Actually build it in tmplibgcc.a, then rename at end,
# so that libgcc.a itself remains nonexistent if compilation is aborted.
    mv tmplibgcc.a libgcc.a

objc-runtime: libobjc.a

# Build the Objective C runtime library.
libobjc.a: cc1obj libgcc2.ready $(USE_COLLECT2) $(EXTRA_PARTS)
    if [ -d objc ]; then true; else mkdir objc; fi
    thisdir1=`pwd`; \
    srcdir1=`cd $(srcdir); pwd`; \
    cd objc; \
    $(MAKE) -f $${srcdir1}/objc/Makefile libobjc.a \
      srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
      GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
      GCC_CFLAGS="$(GCC_CFLAGS)"
    -rm -f libobjc.a
    ln objc/libobjc.a . >/dev/null 2>&1 || cp objc/libobjc.a .
    -if $(RANLIB_TEST) ; then $(RANLIB) libobjc.a; else true; fi

# This is used by objc/Makefile if the user runs that directly.
sublibobjc.a: cc1obj libgcc2.ready
    thisdir1=`pwd`; \
    srcdir1=`cd $(srcdir); pwd`; \
    cd objc; \
    $(MAKE) -f $$srcdir1/objc/Makefile libobjc.a \
      srcdir=$$srcdir1 tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
      GCC_FOR_TARGET="$$thisdir1/xgcc -B$$thisdir1/" \
      GCC_CFLAGS="$(GCC_CFLAGS)"

# Compile two additional files that are linked with every program
# linked using GCC on system V, for the sake of C++ constructors.
crtbegin.o:    crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) -DCRT_BEGIN \
      -finhibit-size-directive -fno-inline-functions \
      -g0 -c $(srcdir)/crtstuff.c -o crtbegin.o

crtend.o:    crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) -DCRT_END \
      -finhibit-size-directive -fno-inline-functions \
      -g0 -c $(srcdir)/crtstuff.c -o crtend.o

# Compiling object files from source files.

# Note that dependencies on obstack.h are not written
# because that file is not part of GCC.
# Dependencies on gvarargs.h are not written
# because all that file does, when not compiling with GCC,
# is include the system varargs.h.

# C language specific files.

c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h c-parse.h \
    c-tree.h input.h flags.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
$(srcdir)/c-parse.c $(srcdir)/c-parse.h: $(srcdir)/c-parse.y
    cd $(srcdir); $(BISON) $(BISONFLAGS) -d c-parse.y -o c-parse.c
$(srcdir)/c-parse.y: $(srcdir)/c-parse.in
    sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
      -e "/^ifc$$/d" -e "/^end ifc$$/d" \
      $(srcdir)/c-parse.in > $(srcdir)/c-parse.y

c-decl.o : c-decl.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h
c-typeck.o : c-typeck.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h
c-lang.o : c-lang.c $(CONFIG_H) $(TREE_H)
c-lex.o : c-lex.c $(CONFIG_H) $(TREE_H) c-lex.h c-tree.h c-parse.h \
    input.h flags.h
c-aux-info.o : c-aux-info.c  $(CONFIG_H) $(TREE_H) c-tree.h flags.h
c-convert.o : c-convert.c $(CONFIG_H) $(TREE_H) flags.h
c-pragma.o: c-pragma.c $(CONFIG_H) $(TREE_H)
c-iterate.o: c-iterate.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h flags.h

# C++ language specific files.

cp-parse.o : $(srcdir)/cp-parse.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h cp-lex.h
    $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
  `echo $(srcdir)/cp-parse.c | sed 's,^\./,,'`

$(srcdir)/cp-parse.c $(srcdir)/cp-parse.h : $(srcdir)/cp-parse.y
    @echo expect 27 shift/reduce conflicts and 14 reduce/reduce conflicts
    cd $(srcdir); $(BISON) $(BISONFLAGS) -d -o cp-parse.c cp-parse.y
    cd $(srcdir); grep '^#define[     ]*YYEMPTY' cp-parse.c >>cp-parse.h

cp-spew.o : cp-spew.c $(CONFIG_H) $(CPLUS_TREE_H) \
   $(srcdir)/cp-parse.h flags.h cp-lex.h
cp-lex.o : cp-lex.c $(CONFIG_H) $(CPLUS_TREE_H) \
   $(srcdir)/cp-parse.h $(srcdir)/cp-input.c flags.h cp-hash.h cp-lex.h
cp-decl.o : cp-decl.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h \
  cp-lex.h cp-decl.h stack.h
cp-decl2.o : cp-decl2.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h \
  cp-lex.h cp-decl.h
cp-type2.o : cp-type2.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h
cp-typeck.o : cp-typeck.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h $(RTL_H)
cp-class.o : cp-class.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h
cp-call.o : cp-call.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h
cp-init.o : cp-init.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h $(RTL_H)
cp-method.o : cp-method.c $(CONFIG_H) $(CPLUS_TREE_H)
cp-cvt.o : cp-cvt.c $(CONFIG_H) $(CPLUS_TREE_H)
cp-search.o : cp-search.c $(CONFIG_H) $(CPLUS_TREE_H) stack.h flags.h
cp-tree.o : cp-tree.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h
cp-ptree.o : cp-ptree.c $(CONFIG_H) $(CPLUS_TREE_H)
cp-gc.o : cp-gc.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h
cp-except.o : cp-except.c $(CONFIG_H) $(CPLUS_TREE_H) flags.h $(RTL_H)
cp-expr.o : cp-expr.c $(CONFIG_H) $(CPLUS_TREE_H) $(RTL_H) flags.h \
  expr.h insn-codes.h
cp-edsel.o : cp-edsel.c $(CONFIG_H) $(CPLUS_TREE_H) stack.h flags.h
cp-xref.o : cp-xref.c $(CONFIG_H) $(CPLUS_TREE_H) input.h
cp-pt.o : cp-pt.c $(CONFIG_H) $(CPLUS_TREE_H) cp-decl.h cp-parse.h
cp-error.o : cp-error.c $(CONFIG_H) $(CPLUS_TREE_H)
cp-errfn.o : cp-errfn.c $(CONFIG_H) $(CPLUS_TREE_H)

g++.o : g++.c $(CONFIG_H) gvarargs.h

# To make a configuration always use collect2, set USE_COLLECT2 to ld.
ld: collect2
    rm -f ld
    ln collect2 ld

collect2 : collect2.o version.o $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
    -rm -f collect2
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o collect2 collect2.o version.o $(LIBS)

collect2.o : collect2.c $(CONFIG_H) gstab.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES)  \
    -DTARGET_MACHINE=\"$(target)\" \
    -c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`

# Objective C language specific files.

objc-parse.o : $(srcdir)/objc-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
   c-tree.h input.h flags.h objc-act.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/objc-parse.c
$(srcdir)/objc-parse.c : $(srcdir)/objc-parse.y
    cd $(srcdir); $(BISON) $(BISONFLAGS) objc-parse.y -o objc-parse.c
$(srcdir)/objc-parse.y: $(srcdir)/c-parse.in
    sed -e "/^ifc$$/,/^end ifc$$/d" \
      -e "/^ifobjc$$/d" -e "/^end ifobjc$$/d" \
      $(srcdir)/c-parse.in > $(srcdir)/objc-parse.y

objc-act.o : objc-act.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h c-lex.h \
   flags.h objc-act.h input.h function.h $(srcdir)/c-parse.h

# A file used by all variants of C.

c-common.o : c-common.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h

# Language-independent files.

gcc.o: gcc.c $(CONFIG_H) gvarargs.h config.status
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
  -DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \
  -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \
  -DDEFAULT_TARGET_MACHINE=\"$(target)\" \
  -DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\" \
  -DTOOLDIR=\"$(tooldir)/\" \
  $(MAYBE_TARGET_DEFAULT) \
  -c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`

dumpvers: dumpvers.c

version.o: version.c
obstack.o: obstack.c

convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h

tree.o : tree.c $(CONFIG_H) $(TREE_H) gvarargs.h flags.h function.h
print-tree.o : print-tree.c $(CONFIG_H) $(TREE_H)
stor-layout.o : stor-layout.c $(CONFIG_H) $(TREE_H) function.h
fold-const.o : fold-const.c $(CONFIG_H) $(TREE_H) flags.h
toplev.o : toplev.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h input.h \
   insn-attr.h xcoffout.h defaults.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
      $(MAYBE_TARGET_DEFAULT) $(MAYBE_USE_COLLECT2) \
      -c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`

rtl.o : rtl.c $(CONFIG_H) $(RTL_H)

print-rtl.o : print-rtl.c $(CONFIG_H) $(RTL_H)
rtlanal.o : rtlanal.c $(CONFIG_H) $(RTL_H)

toplev.o: bytecode.h bc-emit.h
varasm.o : varasm.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h function.h \
   defaults.h insn-codes.h expr.h hard-reg-set.h regs.h xcoffout.h bytecode.h
function.o : function.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h  \
   insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
   recog.h output.h bytecode.h
stmt.o : stmt.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h  \
   insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h loop.h \
   recog.h bytecode.h bc-typecd.h bc-typecd.def bc-opcode.h bc-optab.h \
   bc-emit.h
expr.o : expr.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h  \
   insn-flags.h insn-codes.h expr.h insn-config.h recog.h output.h \
   typeclass.h bytecode.h bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h \
   bc-emit.h modemap.def
calls.o : calls.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h insn-codes.h \
   insn-flags.h gvarargs.h
expmed.o : expmed.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h  \
   insn-flags.h insn-config.h insn-codes.h expr.h recog.h real.h
explow.o : explow.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h hard-reg-set.h \
   insn-config.h expr.h recog.h insn-flags.h insn-codes.h
optabs.o : optabs.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h  \
   insn-flags.h insn-config.h insn-codes.h expr.h recog.h reload.h
dbxout.o : dbxout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h regs.h \
   insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h
sdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) gsyms.h flags.h \
   insn-config.h reload.h
dwarfout.o : dwarfout.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf.h flags.h \
   insn-config.h reload.h output.h defaults.h
xcoffout.o : xcoffout.c $(CONFIG_H) $(TREE_H) $(RTL_H) xcoffout.h flags.h
emit-rtl.o : emit-rtl.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h gvarargs.h \
   function.h regs.h insn-config.h insn-codes.h real.h expr.h bytecode.h \
   bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h bc-emit.h bc-opname.h
real.o : real.c $(CONFIG_H) $(TREE_H)
getpwd.o : getpwd.c $(CONFIG_H)

integrate.o : integrate.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h integrate.h \
   insn-flags.h insn-config.h insn-codes.h expr.h real.h function.h \
   bytecode.h

jump.o : jump.c $(CONFIG_H) $(RTL_H) flags.h hard-reg-set.h regs.h \
   insn-config.h insn-flags.h insn-codes.h expr.h real.h
stupid.o : stupid.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h

cse.o : cse.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h real.h \
   insn-config.h recog.h
loop.o : loop.c $(CONFIG_H) $(RTL_H) flags.h loop.h insn-config.h \
   insn-flags.h insn-codes.h regs.h hard-reg-set.h recog.h expr.h real.h
unroll.o : unroll.c $(CONFIG_H) $(RTL_H) insn-config.h insn-codes.h \
   integrate.h regs.h flags.h expr.h loop.h
flow.o : flow.c $(CONFIG_H) $(RTL_H) flags.h insn-config.h \
   basic-block.h regs.h hard-reg-set.h output.h
combine.o : combine.c $(CONFIG_H) $(RTL_H) gvarargs.h flags.h  \
   insn-config.h insn-flags.h insn-codes.h insn-attr.h regs.h expr.h \
   basic-block.h recog.h real.h hard-reg-set.h
regclass.o : regclass.c $(CONFIG_H) $(RTL_H) hard-reg-set.h flags.h \
   basic-block.h regs.h insn-config.h recog.h reload.h real.h bytecode.h
local-alloc.o : local-alloc.c $(CONFIG_H) $(RTL_H) flags.h basic-block.h \
   regs.h hard-reg-set.h insn-config.h recog.h output.h
global.o : global.c $(CONFIG_H) $(RTL_H) flags.h  \
   basic-block.h regs.h hard-reg-set.h insn-config.h output.h

reload.o : reload.c $(CONFIG_H) $(RTL_H) flags.h \
   reload.h recog.h hard-reg-set.h insn-config.h insn-codes.h regs.h real.h
reload1.o : reload1.c $(CONFIG_H) $(RTL_H) flags.h expr.h \
   reload.h regs.h hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
   basic-block.h recog.h output.h
caller-save.o : caller-save.c $(CONFIG_H) $(RTL_H) flags.h \
   regs.h hard-reg-set.h insn-config.h basic-block.h recog.h reload.h expr.h
reorg.o : reorg.c $(CONFIG_H) $(RTL_H) conditions.h hard-reg-set.h \
   basic-block.h regs.h insn-config.h insn-attr.h insn-flags.h recog.h \
   flags.h output.h
sched.o : sched.c $(CONFIG_H) $(RTL_H) basic-block.h regs.h hard-reg-set.h \
   flags.h insn-config.h insn-attr.h
final.o : final.c $(CONFIG_H) $(RTL_H) $(TREE_H) gvarargs.h flags.h regs.h \
   recog.h conditions.h insn-config.h insn-attr.h real.h output.h \
   hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h
recog.o : recog.c $(CONFIG_H) $(RTL_H)  \
   regs.h recog.h hard-reg-set.h flags.h insn-config.h insn-attr.h \
   insn-flags.h insn-codes.h real.h
reg-stack.o : reg-stack.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
   regs.h hard-reg-set.h flags.h insn-config.h

aux-output.o : aux-output.c $(CONFIG_H) \
   $(RTL_H) regs.h hard-reg-set.h real.h insn-config.h conditions.h \
   insn-flags.h output.h insn-attr.h insn-codes.h

# Build auxiliary files that support ecoff format.
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
    $(CC) $(CFLAGS) $(LDFLAGS) -o mips-tfile mips-tfile.o version.o $(LIBS)

mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H)

mips-tdump: mips-tdump.o version.o $(LIBDEPS)
    $(CC) $(CFLAGS) $(LDFLAGS) -o mips-tdump mips-tdump.o version.o $(LIBS)

mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H)

# Normally this target is not used; but it is used if you
# define ALLOCA=alloca.o.  In that case, you must get a suitable alloca.c
# from the GNU Emacs distribution.
alloca.o:    alloca.c
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \
      -c `echo $(srcdir)/alloca.c | sed 's,^\./,,'`
    $(ALLOCA_FINISH)

# Generate header and source files from the machine description,
# and compile them.

.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
  insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
  insn-attr.h insn-attrtab.c

# The following pair of rules has this effect:
# genconfig is run only if the md has changed since genconfig was last run;
# but the file insn-config.h is touched only when its contents actually change.

# Each of the other insn-* files is handled by a similar pair of rules.

# This causes an anomaly in the results of make -n
# because insn-* is older than stamp-*
# and thus make -n thinks that insn-* will be updated
# and force recompilation of things that depend on it.
# We use move-if-change precisely to avoid such recompilation.
# But there is no way to teach make -n that it will be avoided.

# Each of the insn-*.[ch] rules has a semicolon at the end,
# for otherwise the system Make on SunOS 4.1 never tries
# to recompile insn-*.o.  To avoid problems and extra noise from
# versions of make which don't like empty commands (nothing after the
# trailing `;'), we call true for each.

insn-config.h: stamp-config ; @true
stamp-config : md genconfig $(srcdir)/move-if-change
    ./genconfig md > tmp-config.h
    $(srcdir)/move-if-change tmp-config.h insn-config.h
    touch stamp-config

insn-flags.h: stamp-flags ; @true
stamp-flags : md genflags $(srcdir)/move-if-change
    ./genflags md > tmp-flags.h
    $(srcdir)/move-if-change tmp-flags.h insn-flags.h
    touch stamp-flags

insn-codes.h: stamp-codes ; @true
stamp-codes : md gencodes $(srcdir)/move-if-change
    ./gencodes md > tmp-codes.h
    $(srcdir)/move-if-change tmp-codes.h insn-codes.h
    touch stamp-codes

insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) expr.h real.h output.h \
  insn-config.h insn-flags.h insn-codes.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c

insn-emit.c: stamp-emit ; @true
stamp-emit : md genemit $(srcdir)/move-if-change
    ./genemit md > tmp-emit.c
    $(srcdir)/move-if-change tmp-emit.c insn-emit.c
    touch stamp-emit

insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h recog.h \
  real.h output.h flags.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c

insn-recog.c: stamp-recog ; @true
stamp-recog : md genrecog $(srcdir)/move-if-change
    ./genrecog md > tmp-recog.c
    $(srcdir)/move-if-change tmp-recog.c insn-recog.c
    touch stamp-recog

insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
  insn-config.h flags.h rtl.h recog.h expr.h reload.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c

insn-opinit.c: stamp-opinit ; @true
stamp-opinit : md genopinit $(srcdir)/move-if-change
    ./genopinit md > tmp-opinit.c
    $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
    touch stamp-opinit

insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H)
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c

insn-extract.c: stamp-extract ; @true
stamp-extract : md genextract $(srcdir)/move-if-change
    ./genextract md > tmp-extract.c
    $(srcdir)/move-if-change tmp-extract.c insn-extract.c
    touch stamp-extract

insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) regs.h output.h real.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c

insn-peep.c: stamp-peep ; @true
stamp-peep : md genpeep $(srcdir)/move-if-change
    ./genpeep md > tmp-peep.c
    $(srcdir)/move-if-change tmp-peep.c insn-peep.c
    touch stamp-peep

insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) regs.h real.h output.h \
     insn-attr.h insn-config.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c

insn-attr.h: stamp-attr ; @true
stamp-attr : md genattr $(srcdir)/move-if-change
    ./genattr md > tmp-attr.h
    $(srcdir)/move-if-change tmp-attr.h insn-attr.h
    touch stamp-attr

insn-attrtab.c: stamp-attrtab ; @true
stamp-attrtab : md genattrtab $(srcdir)/move-if-change
    if cmp -s $(PREMADE_ATTRTAB_MD) md;    \
    then                    \
      echo Using $(PREMADE_ATTRTAB);    \
      cp $(PREMADE_ATTRTAB) tmp-attrtab.c;    \
    else                    \
      ./genattrtab md > tmp-attrtab.c;    \
    fi
    $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
    touch stamp-attrtab

insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) regs.h real.h conditions.h \
    hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h recog.h \
    insn-codes.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c

insn-output.c: stamp-output ; @true
stamp-output : md genoutput $(srcdir)/move-if-change
    ./genoutput md > tmp-output.c
    $(srcdir)/move-if-change tmp-output.c insn-output.c
    touch stamp-output

# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(HOST_CC), and associated libraries,
# since they need to run on this machine
# even if GCC is being compiled to run on some other machine.

# $(CONFIG_H) is omitted from the deps of the gen*.o
# because these programs don't really depend on anything
# about the target machine.  They do depend on config.h itself,
# since that describes the host machine.

# Pass the md file through cpp if the target requests it.
$(MD_FILE): $(CPP_MD)
    -if [ -f md.pre-cpp ]; then \
      rm -f md ; ./cpp $(CPP_MD_FLAGS) md.pre-cpp | sed 's/^# /; /g' > md ; \
    else true ; \
    fi

genconfig : genconfig.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genconfig \
      genconfig.o $(HOST_RTL) $(HOST_LIBS)

genconfig.o : genconfig.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c

genflags : genflags.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genflags \
     genflags.o $(HOST_RTL) $(HOST_LIBS)

genflags.o : genflags.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c

gencodes : gencodes.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gencodes \
     gencodes.o $(HOST_RTL) $(HOST_LIBS)

gencodes.o : gencodes.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c

genemit : genemit.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genemit \
     genemit.o $(HOST_RTL) $(HOST_LIBS)

genemit.o : genemit.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c

genopinit : genopinit.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genopinit \
     genopinit.o $(HOST_RTL) $(HOST_LIBS)

genopinit.o : genopinit.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c

genrecog : genrecog.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genrecog \
     genrecog.o $(HOST_RTL) $(HOST_LIBS)

genrecog.o : genrecog.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c

genextract : genextract.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genextract \
     genextract.o $(HOST_RTL) $(HOST_LIBS)

genextract.o : genextract.c $(RTL_H) hconfig.h insn-config.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c

genpeep : genpeep.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genpeep \
     genpeep.o $(HOST_RTL) $(HOST_LIBS)

genpeep.o : genpeep.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c

genattr : genattr.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genattr \
     genattr.o $(HOST_RTL) $(HOST_LIBS)

genattr.o : genattr.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c

genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genattrtab \
     genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS)

genattrtab.o : genattrtab.c $(RTL_H) hconfig.h insn-config.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c

genoutput : genoutput.o $(HOST_RTL) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o genoutput \
     genoutput.o $(HOST_RTL) $(HOST_LIBS)

genoutput.o : genoutput.c $(RTL_H) hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c

# Compile the libraries to be used by gen*.
# If we are not cross-building, gen* use the same .o's that cc1 will use,
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
# with the rules for rtl.o, alloca.o, etc.
$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) $(RTL_H)
    rm -f $(HOST_PREFIX)rtl.c
    sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c

$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) $(RTL_H)
    rm -f $(HOST_PREFIX)print-rtl.c
    sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c

$(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H)
    rm -f $(HOST_PREFIX)rtlanal.c
    sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c

$(HOST_PREFIX_1)alloca.o: alloca.c
    rm -f $(HOST_PREFIX)alloca.c
    cp $(srcdir)/alloca.c $(HOST_PREFIX)alloca.c
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c

$(HOST_PREFIX_1)obstack.o: obstack.c
    rm -f $(HOST_PREFIX)obstack.c
    sed -e 's/config[.]h/hconfig.h/' $(srcdir)/obstack.c > $(HOST_PREFIX)obstack.c
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c

$(HOST_PREFIX_1)malloc.o: malloc.c
    rm -f $(HOST_PREFIX)malloc.c
    sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c

# This satisfies the dependency that we get if you cross-compile a compiler
# that does not need to compile alloca, malloc or whatever.
$(HOST_PREFIX_1):
    touch $(HOST_PREFIX_1)

# Remake bytecode files.
# BI_ALL=bi-run.o
BI_ALL=
BC_ALL=bc-opname.h bc-opcode.h bc-arity.h
BI_OBJ=bi-parser.o bi-lexer.o bi-reverse.o


bc-emit.o : bc-emit.c $(CONFIG_H) $(RTL_H) real.h $(BYTECODE_H) \
     bc-arity.h bc-opcode.h bc-typecd.h bc-typecd.def bi-run.h bytetypes.h
bc-optab.o : bc-optab.c $(CONFIG_H) $(REAL_H) $(BYTECODE_H) \
        bc-opcode.h bc-typecd.h bc-typecd.def


bytecode: $(BI_ALL) $(BC_ALL)

bi-arity: bi-arity.o $(BI_OBJ) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o bi-arity \
     bi-arity.o $(BI_OBJ) $(HOST_LIBS)
bi-opcode: bi-opcode.o $(BI_OBJ) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o bi-opcode \
     bi-opcode.o $(BI_OBJ) $(HOST_LIBS)
bi-opname: bi-opname.o $(BI_OBJ) $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o bi-opname \
     bi-opname.o $(BI_OBJ) $(HOST_LIBS)

bi-run.o:    $(srcdir)/bi-run.c $(srcdir)/bi-run.h $(srcdir)/bc-typecd.h \
  bc-opname.h bc-arity.h bc-opcode.h
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/bi-run.c
$(srcdir)/bi-parser.c $(srcdir)/bi-parser.h: $(srcdir)/bi-parser.y
    cd $(srcdir); $(BISON) $(BISONFLAGS) -d bi-parser.y -o bi-parser.c
bi-parser.o:    $(srcdir)/bi-parser.c $(srcdir)/bi-defs.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
       $(srcdir)/bi-parser.c
bi-lexer.o:    $(srcdir)/bi-lexer.c $(srcdir)/bi-parser.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
       $(srcdir)/bi-lexer.c
bi-arity.o: bi-arity.c $(srcdir)/bi-defs.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
       $(srcdir)/bi-arity.c
bi-opcode.o: bi-opcode.c $(srcdir)/bi-defs.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
       $(srcdir)/bi-opcode.c
bi-opname.o: bi-opname.c $(srcdir)/bi-defs.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
       $(srcdir)/bi-opname.c
bi-reverse.o: bi-reverse.c $(srcdir)/bi-defs.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
       $(srcdir)/bi-reverse.c


bc-arity.h: stamp-bcarity ; @true
stamp-bcarity : $(srcdir)/bytecode.def bi-arity $(srcdir)/move-if-change
    ./bi-arity < $(srcdir)/bytecode.def >tmp-bc-arity.h
    $(srcdir)/move-if-change tmp-bc-arity.h bc-arity.h
    touch stamp-bcarity

bc-opcode.h: stamp-bcopcode ; @true
stamp-bcopcode : $(srcdir)/bytecode.def bi-opcode $(srcdir)/move-if-change
    ./bi-opcode < $(srcdir)/bytecode.def >tmp-bcopcd.h
    $(srcdir)/move-if-change tmp-bcopcd.h bc-opcode.h
    touch stamp-bcopcode

bc-opname.h: stamp-bcopname ; @true
stamp-bcopname : $(srcdir)/bytecode.def bi-opname $(srcdir)/move-if-change
    ./bi-opname < $(srcdir)/bytecode.def >tmp-bcopnm.h
    $(srcdir)/move-if-change tmp-bcopnm.h bc-opname.h
    touch stamp-bcopname

bytecode.mostlyclean:
    -rm -f bc-arity.h bc-opcode.h bc-opname.h

bytecode.distclean bytecode.clean:    bytecode.mostlyclean
    -rm -f bi-arity bi-opcode bi-opname bi-lexer

bytecode.realclean: bytecode.clean
    -rm -f bi-parser.c bi-parser.h


# Remake cpp and protoize.

# Making the preprocessor
cpp: cccp
    -rm -f cpp
    ln cccp cpp
cccp: cccp.o cexp.o version.o $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cccp cccp.o cexp.o version.o $(LIBS)
cexp.o: $(srcdir)/cexp.c $(CONFIG_H)
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
$(srcdir)/cexp.c: $(srcdir)/cexp.y
    cd $(srcdir); $(BISON) -o cexp.c cexp.y
cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status
# The reason we use $(libdir)/g++-include rather than using libsubdir
# is for compatibility with the current version of libg++.
    $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
      -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
      -DGPLUSPLUS_INCLUDE_DIR=\"$(libdir)/g++-include\" \
      -DLOCAL_INCLUDE_DIR=\"$(local_prefix)/include\" \
      -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
      -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
      -DTOOLDIR=\"$(tooldir)/\" \
      -c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`

# Note for the stamp targets, we run the program `true' instead of
# having an empty command (nothing following the semicolon).

proto: config.status protoize unprotoize SYSCALLS.c.X

protoize: protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) \
      protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS) -o $@
protoize.o: stamp-proto ; @true

unprotoize: unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
    $(CC) $(ALL_CFLAGS) $(LDFLAGS) \
      unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS) -o $@
unprotoize.o:    stamp-proto ; @true

stamp-proto:    $(srcdir)/protoize.c getopt.h $(CONFIG_H)
    $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
          -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
          -DGPLUSPLUS_INCLUDE_DIR=\"$(libdir)/g++-include\" \
          -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
      -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
      -DLOCAL_INCLUDE_DIR=\"$(local_prefix)/include\" \
      -DSTD_PROTO_DIR=\"$(libsubdir)\" \
      -DUNPROTOIZE $(srcdir)/protoize.c
    mv protoize.o unprotoize.o
    $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
          -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
          -DGPLUSPLUS_INCLUDE_DIR=\"$(libdir)/g++-include\" \
          -DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
      -DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
      -DLOCAL_INCLUDE_DIR=\"$(local_prefix)/include\" \
      -DSTD_PROTO_DIR=\"$(libsubdir)\" \
      $(srcdir)/protoize.c
    touch stamp-proto

getopt.o: $(srcdir)/getopt.c getopt.h
    $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt.c
getopt1.o: $(srcdir)/getopt1.c getopt.h
    $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt1.c

# This info describes the target machine, so compile with GCC just built.
SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES)
    -rm -f SYSCALLS.c tmp-SYSCALLS.s
    cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
    $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
      -aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c
    -rm -f SYSCALLS.c tmp-SYSCALLS.s


test-protoize-simple: ./protoize ./unprotoize $(GCC_PASSES)
    -rm -f tmp-proto.[cso]
    cp $(srcdir)/protoize.c tmp-proto.c
    chmod u+w tmp-proto.c
    ./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \
      $(CFLAGS) $(INCLUDES) \
      -DGCC_INCLUDE_DIR=0 \
      -DGPLUSPLUS_INCLUDE_DIR=0 \
      -DCROSS_INCLUDE_DIR=0 \
      -DTOOL_INCLUDE_DIR=0 \
      -DSTD_PROTO_DIR=0" tmp-proto.c
    @echo '**********' Expect 400 lines of differences.
    -diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff
    -wc -l tmp-proto.diff
    ./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \
      $(CFLAGS) $(INCLUDES) \
      -DGCC_INCLUDE_DIR=0 \
      -DGPLUSPLUS_INCLUDE_DIR=0 \
      -DCROSS_INCLUDE_DIR=0 \
      -DTOOL_INCLUDE_DIR=0 \
      -DSTD_PROTO_DIR=0" tmp-proto.c
    @echo Expect zero differences.
    diff $(srcdir)/protoize.c tmp-proto.c | cat
    -rm -f tmp-proto.[cso]

# Build the include directory.  The stamp files are stmp-* rather than
# stamp-* so that mostlyclean does not force the include directory to
# be rebuilt.

# Build the include directory except for float.h (which depends upon
# enquire).
stmp-int-hdrs: stmp-fixinc $(USER_H) gvarargs.h gstdarg.h gstddef.h \
  xlimits.h objc-headers
# Copy in the headers provided with gcc.
# The sed command gets just the last file name component;
# this is necessary because VPATH could add a dirname.
# Using basename would be simpler, but some systems don't have it.
    objdir=`pwd`; \
    cd $(srcdir); \
    for file in $(USER_H); do \
      realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
      rm -f $$objdir/include/$$realfile; \
      cp $$realfile $$objdir/include; \
      chmod a+r $$objdir/include/$$realfile; \
    done
    rm -f include/varargs.h
    cp $(srcdir)/gvarargs.h include/varargs.h
    chmod a+r include/varargs.h
    rm -f include/stdarg.h
    cp $(srcdir)/gstdarg.h include/stdarg.h
    chmod a+r include/stdarg.h
    rm -f include/stddef.h
    cp $(srcdir)/gstddef.h include/stddef.h
    chmod a+r include/stddef.h
    rm -f include/limits.h
    cp xlimits.h include/limits.h
    chmod a+r include/limits.h
# Install the README
    rm -f include/README
    cp $(srcdir)/README-fixinc include/README
    chmod a+r include/README
    touch stmp-int-hdrs

# Build the complete include directory.
stmp-headers: stmp-int-hdrs gfloat.h
    rm -f include/float.h
    cp gfloat.h include/float.h
    chmod a+r include/float.h
    touch stmp-headers

# Running fixincludes requires making sure that xgcc and cpp have been
# compiled (they are used to get the value of __SIZE_TYPE__).
# But recompiling xgcc should not force the the header files to be
# fixed again.  If you want to do that, delete stmp-fixinc.
fixinc.ready: xgcc cpp
    -if [ -f fixinc.ready ] ; then \
        true; \
    else \
        touch fixinc.ready; \
    fi

# Build fixed copies of system files.
stmp-fixinc: $(srcdir)/$(FIXINCLUDES) gsyslimits.h fixinc.ready
    rm -rf include
    mkdir include
    if [ x$(FIXINCLUDES) != xMakefile.in ]; \
    then \
      for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
        if [ -d $$dir ]; \
        then \
          $(srcdir)/$(FIXINCLUDES) include $$dir $(srcdir) "`pwd`/xgcc -B`pwd`/"; \
        else true; fi; \
      done; \
    else true; \
    fi
    rm -f include/syslimits.h
    if [ -f include/limits.h ]; then \
      mv include/limits.h include/syslimits.h; \
    else \
      cp $(srcdir)/gsyslimits.h include/syslimits.h; \
    fi
    chmod a+r include/syslimits.h
    touch stmp-fixinc

# copy objc header files into build directory
objc-headers: stmp-fixinc
    if [ -d objc ]; then true; else mkdir objc; fi
    thisdir1=`pwd`; \
    srcdir1=`cd $(srcdir); pwd`; \
    cd objc; \
    $(MAKE) -f $${srcdir1}/objc/Makefile copy-headers \
    srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
    GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
    GCC_CFLAGS="$(GCC_CFLAGS)" incinstalldir=$${thisdir1}/include
    touch objc-headers

# Files related to the fixproto script.

deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
    CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
      export CC; \
      $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h
    mv tmp-deduced.h deduced.h

gen-protos: gen-protos.o scan.o $(HOST_LIBDEPS)
    ${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o gen-protos \
      gen-protos.o scan.o $(HOST_LIBS)

gen-protos.o: gen-protos.c scan.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c

scan.o: scan.c scan.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c

xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
    cat deduced.h $(srcdir)/sys-protos.h > fixtmp.c
    $(GCC_FOR_TARGET) fixtmp.c -E \
      | sed -e 's/    / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
      | ./gen-protos >xsys-protos.h
    rm -rf fixtmp.c

fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS)
    $(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o fix-header \
      fix-header.o scan-decls.o scan.o $(HOST_LIBS)

fix-header.o: fix-header.c obstack.h scan.h xsys-protos.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c

scan-decls.o: scan-decls.c scan.h hconfig.h
    $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c

# stmp-fixproto depends on this, not on fix-header directly.
# The idea is to make sure fix-header gets built,
# but not rerun fixproto after each stage
# just because fix-header's mtime has changed.
fixhdr.ready: fix-header
    -if [ -f fixhdr.ready ] ; then \
        true; \
    else \
        touch fixhdr.ready; \
    fi

# stmp-headers is to make sure fixincludes has already finished.
# The if statement is so that we don't run fixproto a second time
# if it has already been run on the files in `include'.
stmp-fixproto: fixhdr.ready fixproto stmp-headers
    @echo "Various warnings and error messages from fixproto are normal"
    -if [ -d include ] ; then true; else mkdir include; fi
    if [ -f include/fixed ] ; then true; \
    else \
      CPP="$(GCC_FOR_TARGET) -E"; export CPP; \
        ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
      touch include/fixed; \
    fi
    touch stmp-fixproto

# Remake the info files.

doc: info
info: $(srcdir)/cpp.info $(srcdir)/gcc.info

$(srcdir)/cpp.info: cpp.texi
    cd $(srcdir); $(MAKEINFO) cpp.texi

#$(srcdir)/gplus.info: gplus.texi
#    $(MAKEINFO) `echo $(srcdir)/gplus.texi | sed 's,^\./,,'`

$(srcdir)/gcc.info: gcc.texi extend.texi install.texi invoke.texi \
        md.texi rtl.texi tm.texi
    cd $(srcdir); $(MAKEINFO) gcc.texi

dvi: $(srcdir)/gcc.dvi $(srcdir)/cpp.dvi

# This works with GNU Make's default rule.
$(srcdir)/gcc.dvi: gcc.texi extend.texi install.texi invoke.texi \
        md.texi rtl.texi tm.texi
    $(TEXI2DVI) $<

# This works with GNU Make's default rule.
$(srcdir)/cpp.dvi: cpp.texi
    $(TEXI2DVI) $<

$(srcdir)/INSTALL: install1.texi install.texi
    $(MAKEINFO) -D INSTALLONLY --no-header --no-split \
      `echo $(srcdir)/install1.texi | sed 's,^\./,,'`

# Deletion of files made during compilation.
# There are four levels of this:
#   `mostlyclean', `clean', `distclean' and `realclean'.
# `mostlyclean' is useful while working on a particular type of machine.
# It deletes most, but not all, of the files made by compilation.
# It does not delete libgcc.a or its parts, so it won't have to be recompiled.
# `clean' deletes everything made by running `make all'.
# `distclean' also deletes the files made by config.
# `realclean' also deletes everything that could be regenerated automatically.


mostlyclean: bytecode.mostlyclean
    -rm -f $(STAGESTUFF)
# Clean the objc subdir if we created one.
    if [ -d objc ]; then \
      srcdir1=`cd $(srcdir); pwd`; \
      cd objc; $(MAKE) -f $$srcdir1/objc/Makefile mostlyclean; \
    else true; fi
    -rm -f libobjc.a
# Delete the temporary source copies for cross compilation.
    -rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
    -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
    -rm -f $(HOST_PREFIX_1)obstack.c
# Delete the temp files made in the course of building libgcc.a.
    -rm -f tmplibgcc* tmpcopy xlimits.h
    for name in $(LIB1FUNCS); do rm -f $${name}.c; done
# Delete other temporary files.
    -rm -f tmp-float.h tmp-gcc.xtar.gz
    -rm -f tmp-foo1 tmp-foo2 tmp-proto.* tmp-unproto.1 tmp-SYSCALLS.s
# Delete the stamp files.
    -rm -f stamp-* tmp-*
# Delete debugging dump files.
    -rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
    -rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack
# Delete some files made during installation.
    -rm -f specs gfloat.h float.h-* enquire SYSCALLS.c.X SYSCALLS.c
    -rm -f collect collect2 ld mips-tfile mips-tdump alloca.s
# Delete files generated for fixproto
    -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
      gen-protos fixproto.list fixtmp.* fixhdr.ready
# Delete unwanted output files from TeX.
    -rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
# Delete sorted indices we don't actually use.
    -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
# Delete core dumps.
    -rm -f core config/core

# Delete all files made by compilation
# that don't exist in the distribution.
clean: mostlyclean bytecode.clean
# It may not be quite desirable to delete unprotoize.c here,
# but the spec for `make clean' requires it.
# Using unprotoize.c is not quite right in the first place,
# but what better way is there?
    -rm -f libgcc.a libgcc1.a libgcc2.a libgcc2.ready libgcc1.null
    -rm -f *.dvi
    -if [ -f md.pre-cpp ]; then \
      rm -f md ; \
    fi
# Delete the include directory.
    -rm -rf stmp-* fixinc.ready include objc-headers

# Delete all files that users would normally create
# while building and installing GCC.
distclean: clean bytecode.distclean
    -rm -f tm.h aux-output.c config.h config.status tconfig.h hconfig.h
    -rm -f md md.pre-cpp
    -rm -f Makefile *.oaux
    -rm -fr stage1 stage2 stage3 stage4
    -rm -f cp-parse.output
    -rm -f objc-parse.output
    -rm -f c-parse.output

# Delete anything likely to be found in the source directory
# that shouldn't be in the distribution.
extraclean: distclean
    -rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~*
    -rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej
    -rm -f config/*/=* config/*/"#"* config/*/*~*
    -rm -f config/*/*.orig config/*/*.rej
    -rm -f objc/=* objc/"#"* objc/*~*
    -rm -f objc/*.orig objc/*.rej
    -rm -f *.dvi *.oaux *.d *.[zZ] *.gz
    -rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs
    -rm -f *lose config/*lose config/*/*lose
    -rm -f *.s *.s[0-9] *.i install1.texi config/ChangeLog
    -rm -f djefoo

# Get rid of every file that's generated from some other file.
# Most of these files ARE PRESENT in the GCC distribution.
realclean: distclean bytecode.realclean
    -rm -f c-parse.y objc-parse.y
    -rm -f cp-parse.c cp-parse.h cp-parse.output
    -rm -f objc-parse.c objc-parse.output
    -rm -f c-parse.c c-parse.h c-parse.output
    -rm -f cexp.c cexp.output TAGS
    -rm -f cpp.info* cpp.??s cpp.*aux
    -rm -f gcc.info* gcc.??s gcc.*aux
    -rm -f gplus.info* gplus.??s gplus.*aux

# Entry points `install' and `uninstall'.
# Also use `install-collect2' to install collect2 when the config files don't.

# The semicolon is to prevent the install.sh -> install default rule
# from doing anything.  Having it run true helps avoid problems and
# noise from versions of make which don't like to have null commands.
install: $(INSTALL_TARGET) ; @true

# Copy the compiler files into directories where they will be run.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
    install-man install-info

# Do nothing while making gcc with a cross-compiler. The person who
# makes gcc for the target machine has to know how to put a complete
# gcc together by hand.
install-build: force
    @echo You have to install gcc on your target machine by hand.

# Run this on the target machine
# to finish installation of cross compiler.
install-cross-rest: install-float-h-cross

# Install float.h for cross compiler.
# Run this on the target machine!
install-float-h-cross: install-dir
#    if [ -f enquire ] ; then true; else false; fi
# Note: don't use -.  We should fail right away if enquire was not made.
    ./enquire -f > $(tmpdir)/float.h
    -rm -f $(libsubdir)/include/float.h
    $(INSTALL_DATA) $(tmpdir)/float.h $(libsubdir)/include/float.h
    -rm -f $(tmpdir)/float.h
    chmod a-x $(libsubdir)/include/float.h

# Create the installation directory.
install-dir:
    -if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; fi
    -if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; fi
# This dir isn't currently searched by cpp.
#    -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; fi
    -if [ -d $(libdir)/gcc-lib/$(target) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target) ; fi
    -if [ -d $(libdir)/gcc-lib/$(target)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version) ; fi
    -if [ -d $(libdir)/gcc-lib/$(target)/$(version)/include ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version)/include ; fi
    -if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; fi
    -if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; fi
    -if [ -d $(tooldir) ] ; then true ; else mkdir $(tooldir) ; fi
    -if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; fi
    -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
# We don't use mkdir -p to create the parents of mandir,
# because some systems don't support it.
# Instead, we use this technique to create the immediate parent of mandir.
    -parent=`echo $(mandir)|sed -e 's@/[^/]*$$@@'`; \
    if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
    -if [ -d $(mandir) ] ; then true ; else mkdir $(mandir) ; fi

# Install the compiler executables built during cross compilation.
install-common: native install-dir xgcc $(EXTRA_PARTS)
    for file in $(COMPILERS); do \
      if [ -f $$file ] ; then \
        rm -f $(libsubdir)/$$file; \
        $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
      else true; \
      fi; \
    done
    for file in $(EXTRA_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \
      if [ x"$$file" != x.. ]; then \
        rm -f $(libsubdir)/$$file; \
        $(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
      else true; fi; \
    done
# Don't mess with specs if it doesn't exist yet.
    -if [ -f specs ] ; then \
      rm -f $(libsubdir)/specs; \
      $(INSTALL_DATA) specs $(libsubdir)/specs; \
    fi
# Install the driver program as $(target)-gcc
# and also as either gcc (if native) or $(tooldir)/bin/gcc.
    -if [ -f gcc-cross ] ; then \
      rm -f $(bindir)/$(target)-gcc; \
      $(INSTALL_PROGRAM) gcc-cross $(bindir)/$(target)-gcc; \
      if [ -d $(tooldir)/bin/. ] ; then \
        rm -f $(tooldir)/bin/gcc; \
        $(INSTALL_PROGRAM) gcc-cross $(tooldir)/bin/gcc; \
      else true; fi; \
      if [ -f cc1plus ] ; then \
        rm -f $(bindir)/$(target)-g++; \
        $(INSTALL_PROGRAM) g++-cross $(bindir)/$(target)-g++; \
        chmod a+x $(bindir)/$(target)-g++; \
        rm -f $(bindir)/$(target)-c++; \
        ln $(bindir)/$(target)-g++ $(bindir)/$(target)-c++; \
      fi ; \
    else \
      rm -f $(bindir)/gcc; \
      $(INSTALL_PROGRAM) xgcc $(bindir)/gcc; \
      rm -f $(bindir)/$(target)-gcc-1; \
      ln $(bindir)/gcc $(bindir)/$(target)-gcc-1; \
      mv $(bindir)/$(target)-gcc-1 $(bindir)/$(target)-gcc; \
      if [ -f cc1plus ] ; then \
        rm -f $(bindir)/g++; \
        $(INSTALL_PROGRAM) g++ $(bindir)/g++; \
        chmod a+x $(bindir)/g++; \
        rm -f $(bindir)/c++; \
        ln $(bindir)/g++ $(bindir)/c++; \
      fi ; \
    fi
# Install protoize if it was compiled.
    -if [ -f protoize ]; \
    then \
        rm -f $(bindir)/protoize; \
        $(INSTALL_PROGRAM) protoize $(bindir)/protoize; \
        rm -f $(bindir)/unprotoize; \
        $(INSTALL_PROGRAM) unprotoize $(bindir)/unprotoize; \
        rm -f $(libsubdir)/SYSCALLS.c.X; \
        $(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \
        chmod a-x $(libsubdir)/SYSCALLS.c.X; \
    fi
    -rm -f $(libsubdir)/cpp
    $(INSTALL_PROGRAM) cpp $(libsubdir)/cpp

# Install the info files.
install-info: doc install-dir
    -rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
    cd $(srcdir); for f in cpp.info* gcc.info*; \
    do $(INSTALL_DATA) $$f $(infodir)/$$f; done
    -chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*

# Install the man pages.
install-man: install-dir $(srcdir)/gcc.1 $(srcdir)/cccp.1 $(srcdir)/g++.1
    -rm -f $(mandir)/gcc$(manext)
    -$(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/gcc$(manext)
    -chmod a-x $(mandir)/gcc$(manext)
    -rm -f $(mandir)/cccp$(manext)
    -$(INSTALL_DATA) $(srcdir)/cccp.1 $(mandir)/cccp$(manext)
    -chmod a-x $(mandir)/cccp$(manext)
    -$(INSTALL_DATA) $(srcdir)/g++.1 $(mandir)/g++$(manext)
    -chmod a-x $(mandir)/g++$(manext)

# Install the library.
install-libgcc: libgcc.a install-dir
    -if [ -f libgcc.a ] ; then \
      rm -f $(libsubdir)/libgcc.a; \
      $(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \
      if $(RANLIB_TEST) ; then \
        (cd $(libsubdir); $(RANLIB) libgcc.a); else true; fi; \
      chmod a-x $(libsubdir)/libgcc.a; \
    else true; fi

# Install the objc run time library.
install-libobjc: libobjc.a install-dir
    -if [ -f libobjc.a ] ; then \
      rm -f $(libsubdir)/libobjc.a; \
      $(INSTALL_DATA) libobjc.a $(libsubdir)/libobjc.a; \
      if $(RANLIB_TEST) ; then \
        (cd $(libsubdir); $(RANLIB) libobjc.a); else true; fi; \
      chmod a-x $(libsubdir)/libobjc.a; \
    else true; fi

# Install all the header files built in the include subdirectory.
install-headers: install-include-dir $(INSTALL_HEADERS_DIR) install-assert-h
# Fix symlinks to absolute paths in the installed include directory to
# point to the installed directory, not the build directory.
    -files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
    if [ $$? -eq 0 ]; then \
      dir=`cd include; pwd`; \
      for i in $$files; do \
        dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
        if expr "$$dest" : "$$dir.*" > /dev/null; then \
          rm -f $(libsubdir)/include/$$i; \
          ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \
        fi; \
      done; \
    fi

# Create or recreate the gcc private include file directory.
install-include-dir: install-dir
    -rm -rf $(libsubdir)/include
    mkdir $(libsubdir)/include
    -chmod a+rx $(libsubdir)/include

# Install the include directory using tar.
install-headers-tar: stmp-headers $(STMP_FIXPROTO) install-include-dir
    cd include; \
     (tar cf - .; exit 0) | (cd $(libsubdir)/include; tar $(TAROUTOPTS) - )
# /bin/sh on some systems returns the status of the first tar,
# and that can lose with GNU tar which always writes a full block.
# So use `exit 0' to ignore its exit status.

# Install the include directory using cpio.
install-headers-cpio: stmp-headers $(STMP_FIXPROTO) install-include-dir
    cd include; find . -print | cpio -pdum $(libsubdir)/include

# Put assert.h where it won't override GNU libc's assert.h.
# It goes in a dir that is searched after GNU libc's headers;
# thus, the following conditionals are no longer needed.
# But it's not worth deleting them now.
## Don't replace the assert.h already there if it is not from GCC.
## This code would be simpler if it tested for -f ... && ! grep ...
## but supposedly the ! operator is missing in sh on some systems.
install-assert-h: assert.h install-dir
    if [ -f $(assertdir)/assert.h ]; \
    then \
      if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \
        then \
        rm -f $(assertdir)/assert.h; \
        $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
        chmod a-x $(assertdir)/assert.h; \
      else true; \
      fi; \
    else \
      rm -f $(assertdir)/assert.h; \
      $(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
      chmod a-x $(assertdir)/assert.h; \
    fi

# Use this target to install the program `collect2' under the name `ld'.
install-collect2: collect2 install-dir
    $(INSTALL_PROGRAM) collect2 $(libsubdir)/ld
# Install the driver program as $(libsubdir)/gcc for collect2.
    $(INSTALL_PROGRAM) xgcc $(libsubdir)/gcc

# Cancel installation by deleting the installed files.
uninstall:
    -rm -rf $(libsubdir)
    -rm -rf $(bindir)/gcc
    -rm -rf $(bindir)/protoize
    -rm -rf $(bindir)/unprotoize
    -rm -rf $(mandir)/gcc$(manext)
    -rm -rf $(mandir)/g++$(manext)
    -rm -rf $(mandir)/cccp$(manext)
    -rm -rf $(mandir)/protoize$(manext)
    -rm -rf $(mandir)/unprotoize$(manext)

# These exist for maintenance purposes.

# Update the tags table.
TAGS: force
    cd $(srcdir);                            \
    mkdir temp;                            \
    mv -f c-parse.[ch] cp-parse.[ch] objc-parse.c cexp.c =*.[chy] temp; \
    etags *.y *.h *.c;                        \
    mv temp/* .;                            \
    rmdir temp

# Create the distribution tar file.
#dist: gcc-$(version).tar.gz
dist: gcc.xtar.gz

gcc.xtar.gz: gcc.xtar
    gzip < gcc.xtar > tmp-gcc.xtar.gz
    mv tmp-gcc.xtar.gz gcc.xtar.gz

#gcc-$(version).tar.gz: gcc-$(version).tar
#    gzip < gcc-$(version).tar > gcc-$(version).tar.gz

#gcc-$(version).tar:
gcc.xtar: distdir
# Make the distribution.
    tar chf gcc.xtar gcc-$(version)

distdir: doc $(srcdir)/INSTALL c-parse.y objc-parse.y cp-parse.y \
  c-parse.c cp-parse.c objc-parse.c cexp.c
    @if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
    then true; \
    else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
    fi
# Update the version number in README
    awk '$$1 " " $$2 " " $$3 == "This directory contains" \
        { $$6 = version; print $$0 } \
         $$1 " " $$2 " " $$3 != "This directory contains"' \
      version=$(version) README > tmp.README
    mv tmp.README README
    -rm -rf gcc-$(version) tmp
# Put all the files in a temporary subdirectory
# which has the name that we want to have in the tar file.
    mkdir tmp
    mkdir tmp/config
    mkdir tmp/objc
    for file in *[0-9a-zA-Z+]; do \
      ln $$file tmp > /dev/null 2>&1 || cp $$file tmp; \
    done
    cd config; \
    for file in *[0-9a-zA-Z+]; do \
      if test -d $$file && test "$$file" != RCS; then \
        mkdir ../tmp/config/$$file; \
        cd $$file; \
        for subfile in *[0-9a-zA-Z+]; do \
          ln $$subfile ../../tmp/config/$$file >/dev/null 2>&1 \
          || cp $$subfile ../../tmp/config/$$file; \
        done; \
        cd ..; \
      else \
        ln $$file ../tmp/config >/dev/null 2>&1 \
        || cp $$file ../tmp/config; \
      fi; \
    done
    cd objc; \
    for file in *[0-9a-zA-Z+]; do \
      ln $$file ../tmp/objc >/dev/null 2>&1 || cp $$file ../tmp/objc; \
    done
    ln .gdbinit tmp
    mv tmp gcc-$(version)
# Get rid of everything we don't want in the distribution.
    cd gcc-$(version); make -f Makefile.in extraclean

# make diff oldversion=M.N
# creates a diff file between an older distribution and this one.
# The -P option assumes this is GNU diff.
diff:
    diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x objc-parse.y \
      -x cp-parse.c -x cp-parse.h -x cexp.c -x bi-parser.c \
      -x objc-parse.c -x TAGS -x "gcc.??" -x "gcc.??s" -x gcc.aux \
      -x "cpp.??s" -x "cpp.??" -x cpp.aux -x "cpp.info*" -x "gcc.info*" \
      gcc-$(oldversion) gcc-$(version) > diffs

# do make -f ../gcc/Makefile maketest DIR=../gcc
# in the intended test directory to make it a suitable test directory.
# THIS IS OBSOLETE; use the -srcdir operand in configure instead.
maketest:
    ln -s $(DIR)/*.[chy] .
    ln -s $(DIR)/configure .
    ln -s $(DIR)/*.def .
    -rm -f =*
    ln -s $(DIR)/.gdbinit .
    ln -s $(DIR)/$(FIXINCLUDES) .
    -ln -s $(DIR)/bison.simple .
    ln -s $(DIR)/config .
    ln -s $(DIR)/move-if-change .
# The then and else were swapped to avoid a problem on Ultrix.
    if [ ! -f Makefile ] ; then ln -s $(DIR)/Makefile .; else false; fi
    -rm tm.h aux-output.c config.h md
    make clean
# You must then run config to set up for compilation.

bootstrap: force
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2.
    $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES=c
    $(MAKE) stage1
# This used to define ALLOCA as empty, but that would lead to bad results
# for a subsequent `make install' since that would not have ALLOCA empty.
# To prevent `make install' from compiling alloca.o and then relinking cc1
# because alloca.o is newer, we permit these recursive makes to compile
# alloca.o.  Then cc1 is newer, so it won't have to be relinked.
    $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)"
    $(MAKE) stage2
    $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)"

bootstrap2: force
    $(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)"
    $(MAKE) stage2
    $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)"

bootstrap3: force
    $(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) LANGUAGES="$(LANGUAGES)"

# Compare the object files in the current directory with those in the
# stage2 directory.

# ./ avoids bug in some versions of tail.
compare: force
    for file in *.o; do \
      tail +16c ./$$file > tmp-foo1; \
      tail +16c stage2/$$file > tmp-foo2 2>/dev/null \
        && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \
    done
    -rm -f tmp-foo*

# Similar, but compare with stage3 directory
compare3: force
    for file in *.o; do \
      tail +16c $$file > tmp-foo1; \
      tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
        && (cmp tmp-foo1 tmp-foo2 || echo $$file differs); \
    done
    -rm -f tmp-foo*

# Copy the object files from a particular stage into a subdirectory.
stage1: force
    -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
    -mv $(STAGESTUFF) stage1
    -rm -f stage1/libgcc.a
    -cp libgcc.a stage1
    -if $(RANLIB_TEST) ; then $(RANLIB) stage1/libgcc.a; else true; fi

stage2: force
    -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
    -mv $(STAGESTUFF) stage2
    -rm -f stage2/libgcc.a
    -cp libgcc.a stage2
    -if $(RANLIB_TEST) ; then $(RANLIB) stage2/libgcc.a; else true; fi

stage3: force
    -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
    -mv $(STAGESTUFF) stage3
    -rm -f stage3/libgcc.a
    -cp libgcc.a stage3
    -if $(RANLIB_TEST) ; then $(RANLIB) stage3/libgcc.a; else true; fi

stage4: force
    -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
    -mv $(STAGESTUFF) stage4
    -rm -f stage4/libgcc.a
    -cp libgcc.a stage4
    -if $(RANLIB_TEST) ; then $(RANLIB) stage4/libgcc.a; else true; fi

# Copy just the executable files from a particular stage into a subdirectory,
# and delete the object files.  Use this if you're just verifying a version
# that is pretty sure to work, and you are short of disk space.
risky-stage1: force
    -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
    -mv $(GCC_PARTS) stage1
    -rm -f stage1/libgcc.a
    -cp libgcc.a stage1 && $(RANLIB) stage1/libgcc.a
    -make clean

risky-stage2: force
    -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
    -mv $(GCC_PARTS) stage2
    -rm -f stage2/libgcc.a
    -cp libgcc.a stage2 && $(RANLIB) stage2/libgcc.a
    -make clean

risky-stage3: force
    -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
    -mv $(GCC_PARTS) stage3
    -rm -f stage3/libgcc.a
    -cp libgcc.a stage3 && $(RANLIB) stage3/libgcc.a
    -make clean

risky-stage4: force
    -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
    -mv $(GCC_PARTS) stage4
    -rm -f stage4/libgcc.a
    -cp libgcc.a stage4 && $(RANLIB) stage4/libgcc.a
    -make clean

#In GNU Make, ignore whether `stage*' exists.
.PHONY: stage1 stage2 stage3 stage4 clean realclean TAGS bootstrap
.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4

force: